中英文e2等级50g标准砝码证书范本

上海实润实业有限公司

Shanghai shirun industrial co. LTD

砝 码 鉴 定 合 格 证

Qualification Certificate of Weight Appraisal

等    级：_E2______________________

Grade:     E2______________________

编    号：_3421_____________

No:        3421______________

材    质：_316无磁不锈钢____________

  aterial: _316 magnetic free stainless steel_

数    量   1个_____________________

Quantity:  1pcs_____________________

密    度：_ 7.94g/cm3___________________

Density: ___7.94g/cm3_______________

规    格：_ 50g________________________

Rules: ___  50g_______________________

鉴定标准：_ JJG99-2006_________________

Identification criteria：   JJG99-2006_       

 鉴定结果：_________________________

Identification results：      Qualified         

鉴定人：__姜红_________

The surveyor：   Hong Jiang  

       复核人： _陈善龙____  __

Reviewer：  ShanLong Chen        

检定日期：__2020__年__11__月_30日

Check the date：   November 30, 2020     

有效日期：___2021__年_11月__30_日

The effective date: November 30, 2021    

注意事项：在行任何测试之前，砝码都必须要清洁。清洁过程不能去除任何块砝码材料。砝码在抓取和储存时都必须保持其清洁。清洁时不得改变砝码的表面特性（如：划伤砝码）。如果砝码上有灰尘，可以用干净的无水乙醇清洁砝码或局部。带有调节腔的砝码不得浸入溶液中，以免液体浸入腔体。

Note: before any test, the weights must be cleaned. The cleaning process does not remove any weight material. Weights must be kept clean while being grabbed and stored. Do not change the surface properties of the weights (e.g. scratch weights) during cleaning. If the weight is dusty, clean the weight or area with clean anhydrous ethanol. Weights with regulating Chambers should not be immersed in solution to prevent the liquid from entering the chamber.